Dream it Do it - layout shown at Kaisercraft's stand at CHA 2016

This is the last layout I am showing, that was features at Kaisercraft's stand at CHA - spring 2017.

The photo was taken at CHA, before it the opening – spring 2016.

The layout has been created in layers with collectables, wooden embellishments and paper strips.

 __________________

INSTRUCTIONS:

Photo: 8cm x8cm (3 1/8” x 3 1/8”).

Start with the background paper MISTY (reverse). Stamp with the sentiment background stamp on the left, bottom side of the page and at the right of the middle. These two places are going to be the focus of the page. 

Cut strips of different papers from the paper pad. Make sure the strips are different lengths and widths. Glue the strips of paper to the background page, where you are going to have the photo. Add the frames from the INDIGO SKIES collectables. Stamp with the Chevron background stamp, here and there, around the focus of the page, over the paper strips and background paper. Add a few pieces of thin string. Take 10cm of the glitter tape, and cut it into 2mm long strips. Add them to the focus point of the page. 

Add a few rectangles from the INDIGO SKIES paper pad, behind the photo. The pieces should be slightly larger than the photo. Ad them with 3D tape or cardboard between them to create dimensions. Add the photo with the paper rectangles to the page, over the paper strips at the top, right - center of the page.

Add a few frames from the Flourish pack. Put them under, and in between the layers around the photo. Use the word HELLO, from the Flourish pack, and glue it above the photo, on the right hand side.

Add the text from the collectables to the bottom left side of the page. Fussy cut a few butterflies and flowers from the INDIGO SKIES paper pad. Add them to the page. Fussy cut words from the BREEZE paper, and add them to the background of the page. Add the rhinestones, here and there.

__________________

Kaisercraft products:  Indigo Skies paper collection - P2290 Misty, P2294 Breeze | PP1018 Indigo Skies Paper Pad | CT880 Indigo Skies Collectables 1 RS402 Rhinestones - Island Lagoon | Clear Stamps - CS149 Texture Chevron, CS261 Sentiments | IP719 Small Ink Pad - Black |  PT228 Glitter Tape - Mint | FL592 Flourish Pack – Hello.

Other: White String.

Time - layout shown at Kaisercraft's stand at CHA 2017

I had a lot of layouts featered at Kaisercraft's stand at CHA this year. This layout is showing the High Tea collection.

__________________

INSTRUCTIONS:

Photo: 10cm x 8cm (3 15/16” x 3 1/8”)

Start with the background paper TEA TIME (reverse). Tear away the “torn” part of the background paper, right – bottom side. Glue the paper CUPPA (reverse) behind the tear. Stress the torn sides of the TEA TIME paper, to create dimensions. 

Add a few blue and white rectangles from the HIGH TEA paper pad, behind the photo. The pieces has to be slightly larger than the photo. Ad them with 3D tape or cardboard between them to create dimensions. Add the photo with the paper rectangles to the page, top right hand side. 

Diecut some gears from the white glitter cardstock. Tuck them in between the layers of the paper under the photo. Cut out a banner with chevrons from the CUPPA (reversed) page. Add them, with 3D tape, under the photo, right side. 

Cut the text from the bottom of the BISCUIT (reverse) paper. Add the text to the centre of the page.

___________________

Kaiercraft products: High Tea Paper collection - P2278 Biscuit, P2280 Tea Time, P2283 Cuppa | 

PP1017 High Tea Paper Paper Pad | GC104 Glitter Cardstock Crystal | DD706 Decorative Dies Cogs | SB713 Pearls -  Pearl.

Summer Journey - Layout created for Kaisercraft for CHA 2017

This is one of my layouts created for CHA - spring 2017 with the High Tea collection. 

The layout has been built up in layers with paper, fussy cut roses and corrugated cardstock.

______________________

INSTRUCTIONS:

Photo: 11cm x 9cm (4 5/16” x 3 9/16”)

Start with the background paper BISCUIT. Tear of the corrugated cardboard pattern on the pater at the bottom part of the page. Also, cut out the small biscuits from the background paper. Add a piece of corrugated cardboard at the back, so the corrugated paper will show where the background paper has been removed. This is to create dimensions.  Add the teacups from the HIGH TEA collectables beside the teacups on the background paper. Add the cut out biscuits with 3D tape for dimension. 

Tear of a large piece corrugated cardboard, 22cm x 17cm (8 11/16” x 6 11/16”) shaped as a long half circle) and add it to the right hand side of the background paper. Add layers of papers from the HIGH TEA paper pad in different sizes on the right side. Add dimensions by using cardboard or 3D tape between the layers. Add a piece of 12cm x 10cm paper from the HIGH TEA small paper pad behind the photo. The photo should be centred onto this paper. Add the photo and the paper to your page.

Fussy cut all the roses from one of the rose pages in the HIGH TEA paper pad. Add the flowers in between the layers of papers on the right hand side of the page. Add the mini paper blooms, in between the layers. Use dies to create the text for the page. The text has been added in two layers, the background layer dark pink and front layer light pink. 

Cover the photo to protect it. Use the Kaisermist, take the mist top away from the bottle, and use it to sprinkle white mist over the page. Add pearls. Paint gesso as an effect onto parts of the corrugated paper on the page.

___________________

Kaisercraft products:  High Tea Paper collection - P2278 Biscuit |PP1017 High Tea Paper Pad | CT879 High Tea Collectables | CB153 Corrugated Cardboard Sheets | Decorative dies – DD748 Summer words | DD771 Travel words |  F646 Mini Paper Blooms – Buttercream  KM111 Kaisermist – White | Pearls – SB713 White,  SB788 Plum.

Other: Gesso

Long Beach - Layout created for Kaisercraft for CHA 2017

This is one of my 7 layouts shown at CHA - spring 2017. The photo is of Long Beach, (taken from Queen Mary), US.

___________________

INSTRUCTIONS:

Photo 20cm x 7cm (7 7/8” x 2 ¾”)

Start with the background paper SHIBORI. Make sure the stripes go sideways. Work on the top middle of the page. Stamp with the Background script and texture chevron stamp on the top half of the page. The stamping should just about be shown under the overlaying papers. 

Cut out a strip of 30cm x 12cm ( 12” x 4 ¾”) from the STORM paper. Add this to the top, middle of the page, sideways – from edge to edge of the paper. Glue with 3D tape or use cardboard in between the layers to create depth. Add the white Chevrons, using the Designer template and gesso.

Cut out strips from the INDIGO SKIES paper pad. Add strips of papers to the top and bottom and top of the STORM strip, add them slightly to the side of the center. Adding them in several layers. Cut strips of lace, and add this in between the layers of paper strips. 

Cut a few rectangles of paper from the INDIGO SKIES paper pad, different sizes. Add the rectangles behind the photo, using 3D tape. Add the photo with the rectangles to the background. Add boarders from the INDIGO SKIES paper pad to the bottom of the photo. Take a clock out of the INDIGO SKIES collectables. Cut it in two and add the two parts under the STORM paper.

Cut the Love quote from the BLUE MOON paper. Add a frame around the back of the quote with left over paper from the STORM paper. Add the quote to the left, bottom of the photo. Tuck a banner from the BLUE MOON collectables, under the quote. 

Cover the photo, and splat gently with the white Kaisermist over the page, using the inside spray end of the bottle. Stamp with one of the texture butterfly stamps, from the bottom left side to the top. Fussy cut butterflies from the BLUE Moon paper pad and CHAMBRAY paper. Add the butterflies to the page.

_________________

Kaisercraft materials: Indigo Skies Paper Collection - P2286 Chambray, P2287 Shibori, P2288 Storm, P2293 Blue Moon, P2294 Breeze | PP1018 Indigo Skies Paper Pad | CT880 Indigo Skies Collectables | EM926 Lace Pack | IT924 Designer template- Textures, Clear stamps - CS257 Background Script |  CS149 Texture Chevron |  CS854 Texture Butterflies | IP719 Small Ink Pad - Black.

Other: Gesso

All you have to do is fly - a layout shown at CHA 2017

 Today, I am showing a layout created with the Indigo Skies collection for Kaisercraft's stand at CHA - 2017. 

The photo, was taken in Port Douglas, in Australia, 10 years ago.

The layout is full of butterflies, colours created with Kaisermists and quotes.

_____________________

INSTRUCTIONS:

Photo: 12,5cm x 8cm (4 15/16” x 3 1/8”).

Start with the background paper. Spray water onto the paper. Spray the mists onto cling film. Tab the cling film onto the background paper in the middle, the bottom left side corner and top left side corner. If the colours are strong, spray on some water. Let dry. Iron the page, to make it flat again. Stamp over the background with the Texture diamond stamp, in places.

Cut strips of paper from the INDIGO SKIES paper pad. Also, cut of the bottom strips of the page MISTY (reverse). Add the strips of paper to the middle, right side of the page. 

Cut two rectangles, 9cm x 8cm, from the denim paper in the INDIGO SKIES paper pad. Layer the rectangles and glue them to the photo, using 3D tape for depth. Add the photo, with the rectangles to the background.

Cut the “Your wings” quote from the BLUE MOON paper. Glue this to the top of the “Right Now” banner from the INDIGO SKIES collectables, using 3D tape for depth. Glue these to the top left hand side of the page.

Fussy cut butterflies from the CHAMBRAY paper and the butterfly paper in the INSIGO SKIES paper pad. Add them to the page. Add pearls.

Use the text on the boarder from the WASHED OUT paper (reverced), and add this to the layout.

___________________

Kaisercraft products: Indigo Skies Paper Collection - P2286 Chambray, P2289 Washed Out, P2290 Misty, P2293 Blue Moon | PP1018 Indigo Skies Paper Pad | CT880 Indigo Skies Collectables | Kaisermists - KM116 Aqua, KM106 Denim, KM111 White | SB713 Peals – Pearl | RS402 Rhinestones Island Lagoon | FL590 Flourish Pack - Love (Heart) | CS152 Clear Stamp - Texture Diamonds | IP719 Small Ink Pad - Black.

Other: Cheese Cloth

Perfect dog - layout shown at CHA - spring 2017

This is one of my layouts, shown at Kaisercraft's stand at CHA - spring 2017. The layout, is a clean and simple layout, created with the Pawfect collection. 

Layouts from Kaisercraft's stand at CHA - spring 2016. Photo: Luciana Warnowski.

Materials:

PAPERS: Pawfect Paper Collection - P2263 Meow, P2266 Ruff, P2267 Pawsome.

KC PRODUCTS: SS333 Pawfect Sticker sheet, CT876 Pawfect Collectables dog. 

Other: Brown and latte cotton (Sewn with sewing machine).

Instructions:

Photo 8cm x 10cm ( 3 1/8” x 3 15/16”).

Start with the background paper MEOW (reverse). The wood is going vertically. Sew, with a sewing machine the boarders on the top right side of the page, and about 10cm up from the bottom of the page. 

Cut out the “Best dog” quote from the RUFF paper. Cut a rectangle of 16cm x 11cm from the PAWSOME paper. Add the photo and the “Best dog” quote to the rectangle, using 3D tape. 

Add the balls from the Sticker sheet. Add the banner and the arrows from the PAWFECT collectables. Cut out a few quotes from the PAWSOME paper, and add these to the top, right side of the page.

Simple Joys of Life - Layout created for CHA - spring 2017 for Kaisercraft

This spring, I has eight layouts shown at CHA, at Kaisercraft's stand. This layout was created with the Wildflower colletion. The photo is from the sunset at the 22nd World Scout Jamboree in Sweden (2011). 

Materials:

PAPERS: Wildflower Collection - P2269 Vines, CD603 Premium Cardstock – Black.

KC PRODUCTS: PP1016 Wildflower Paper Pad, CT978 Wildflower Collectables, IT924 Designer Template - Textures, CS149 Clear Stamps - Texture Chevron, Decorative Dies - DD789 Mandela, DD303 Clock, DD706 Cogs, DD945 Love Quotes, GC103 Glitter Cardstock - Platinum, SB793 Pearls - Black, RS403 Rhinestones - Antique Rose. Glitter tape – PT228 Mint,

PT229 Ice Blue, IP719 Small Ink Pad - Black., EM926 Lace Pack.

Instructions:

Photo: 10cm x 16cm (3 15/16” x 6 5/16”).

Start with the background paper VINES (reverse). Center the work above the center of the page, slightly to the left.  Create the large chevrons using the Designer Template and black ink. Create the smaller chevrons using the Chevron texture stamp. 

Add a light rectangle, from the WILDFLOWER paper pad, behind the photo. The rectangle is adding a light border to the photo. Add a rectangle of black cardstock, behind the photo with the light frame. This will create a black frame outside the white frame. Add rectangles of different sizes behind the photo with the frames. 

Create diecuts from the WILDFLOWER paper pad with the Clock die and the Mandela die. Also make a diecut with the clock die and the black cardstock. Create diecuts of the cogs in the glitter cardstock. Create tags with the pink papers from the WILDFLOWER paper pad and the Love quotes dies. 

Colour the lace with black ink. Layer the lace, paper rectangles and diecuts, using 3D tape to create dimensions. Add the photo with the frames. Cut a banner at the end of two glitter tape strips, MINT and ICE BLUE. Add the glitter tape, at the right side of the image. 

Add the quote “Think Happy, Be happy” from the WILDFLOWER collectables. The edge of the quote has been cut, using patterned scissors. and black cardstock has been added underneath. Add the text from the bottom of the VINES paper (reverced) to the layout. Add Rhinestones and Pearls to the layout.

The Little things, layout shown at CHA at Kaisercraft's stand - Spring 2017

I had eight layouts on show at Kaisercraft's stand at CHA this spring. The first one I am going to show here, is this layout created with the Hanami Garden collection.

The photo was taken at temple in Kyoto, when I was i Japan two years ago.

The flowers under the photo is part of the background paper and has been fussy cut from papers from the collection

_______________________________________

INSTRUCTIONS/ TUTORIAL:

PAPERS: Hanami garden Paper Collection – P2254 Sakura, P2258 Hoshi.

KC PRODUCTS: PP1015 Hanami garden Paper Pad, CT875  Hanami garden Collectables, F640 Paper Blooms - Fairy Floss, Mini Paper Blooms - F646 Buttercream. F657 Fairy Floss, F667 Coral, FL590 Flourish Pack – Love, DD129 Decorative Die - Words The Little Things.

Photo: 8,5cm x 10,5 cm (3 3/8” x 4 1/8”) (Temple in Kyoto)

Cut 10 cm of the bottom of the HOSI paper (The tree is on the top part of the paper). Glue the HOSI paper onto the SAKURA paper, leaving the flowers on the SAKURA paper at the top of the page. 

Curl the top right side of the page around a knitting needle. Glue a page from the small HANAMI GARDEN paper pack at the back (reverse). Curl this little paper in the same way. The right side of the paper will show as you curle it. Glue a new page at the back of the corner (right side). 

Cut a rectangle 14cm x 11cm (5 ½ “x 4 5/16”) from one of the papers in the small paper pad. Add the paper to the top right side of the page (use 3D tape or cardboard between the layers to create dimensions). Add the photo to this layer. Add flowers in-between the layers.

Cut out the text, using dies, and add it to the page.

________________________________

 Hanami garden layouts at CHA - spring 2017. Photo: Luciana Warnowski

A doll with a paper dress - Created for LDRS for CHA - winter 2017

 I decided to show something different for CHA for LDRS creative. I wanted to show some of the embossing folders, together with dies. For the white layers of the dress, I used the Timeless embossing folders and the new Picnic Quilt Embossing folder, to emboss white card stock. This created a nice texture for the white parts of the dress. 

All the flowers are hand made, and the dragonflies, created with together with the Key Tailed Dragonfly Die Set, are featured in between the flowers. I also created small gears with the same die set, and added the gears between the flowers. The paper ribbon, has been created with The Basic Cutting Edge Border and the Fancy Rectangles die set. 

The paper lace, created with  the Basic Cutting Edge Border for edge of the white dress.  

I also added some hand made roses to the hair of the doll. 

The base for the doll, is hand made. I have used the new stamp "Time For A Cuppa" from the Candi Bean collection, under the base.  

The paper collection used for this dress, is Lemoncraft's - Gossamer Blue.

Photos from LDRScreative's stand at CHA 2017

Enjoy :)